Replacement 3M® Double Sided Material for the Universal Sticky Base and Carbon Fiber MagSafe

Benefits

• The 3M double sided replacement material is good for one time use.
  
• Provides some minor movement between bonded surfaces and is good for shock absorption.
• Can be used with either the MagSafe G2 Carbon Fiber holder or the Universal Sticky Base.

Product Details

• Contains 1 part. The part is double sided with liner on each side. 
• Strong 3M brand VHB backing to stick to the carbon fiber and the contact surface.

Installation is Easy.

• Peel off the older 3M double-sided pressure Very High Bond (VHB)
  
• Wipe the base of any residue.
• Install on the flat surface.
• After application, 3M® states the bond strength will increase as the adhesive flows onto the surface. At room temperature, approximately;
      •    50% of the ultimate strength will be achieved after 20 minutes,
      •    90% after 24 hours and
      •    100% after 72 hours.
  Fortunately, once the tape has been applied and set, the adhesive will generally hold all the way down to -40ºC!